วันศุกร์ที่ 26 พฤศจิกายน พ.ศ. 2553

Home repairs.Repairing wood mosaic parquet.Procedures for contacting the building.



Playing surface with a furniture repairing locker.

For those with old furniture. And are interested to see the new reparable. Example, want to shine like the original to the chair must provide tools are playing Soccer estimated this number by considering the chair 5 and Table home 1, the use of Lake Kerr's about 1 / 2 gallons of paint thinner 1 gallon No. 0 sandpaper, about 12 sheets or brush rabbit brush channel some 2-3 million lactate coated metal bowl, a few leaves after the second preparation devices are ready to begin repairs.

1. Sanding off the old skin as possible. If it comes down to paint over the surface pH changed to make difficult
2. And then mixed Lake Curtain coating in the bowl, do not apply to the very thick before a trip.
3. Let it dry for about 30 minutes and see if rubbed surface is rough or coarse sandpaper to polish the crow was so smooth.
4. Apply Curtain Lake is the second time, let it dry.
5. Tha Lake Curtain is at 3 times the surface area it needs special leave to dry.

reparable wood mosaic parquet.

When most of the flood. Parquet disintegration will become corrupted. Sometimes the surface disintegration. If this occurs, such as Should be a qualified person to fix the attack. Do not plan to repair itself. But if the disintegration few pieces we have enough to reparable itself.

The reason for the disintegration parquet as follows.

1. Because the tape is not. Not tight or polished smooth before the glue is dry. Glue or uneven
2. Waterlogging on the ground. For a long time the deflection of wood swelling up.
3. Termites eating wood does not make a basin or a rough track, not beautiful.

How to repairing, do the following.

1. To explore the use of any kind, such as wooden parquet Mai Daeng teak wood or hard wood plain Shop for the purchase of a new parquet crab.
2. Prepared pieces of wood to dry. Buy latex adhesive or glue for wood to use.
3. Preparing the ground for gluing. Extracted by mouth or flat screwdriver old. Scraping the bottom and remove all old adhesive dust thoroughly.
4. Gummed label latex prepared to approximately 1-2 mm thick piece of wood that came off it was slowly inserted into the press and tap the surface of the wood to maintain the same.
5. And then leave the glue dry for at least 15 days.
6. The number 0 fine sandpaper to polish the seam. The piece is not always the same. Varnish oil to mix paint thinner, some 2-3 times until it was level again, and then polished with sandpaper smooth finish.
7. The merged channel Marl million lactate dyed the same color as the original. Filling Father's burr, then sanding again. Apply million lactate channel surface before I dyed the same color paper, then rubbed oil coated surface with paint thinner to clear .. Shall be completed.

reparable bathroom tile.

In general, a bathroom wall covered with glazed tiles. Whether old or new. Disintegration may be. This may be caused by loose enough to cover tile or you may have to prod the inside or outside wall. The tiles have come off. reparable the Icon that will be difficult because Tile work requires expert But for minor problems such as 1-2 tiles off our plate, it is enough to make your own.

How to fix the bathroom tiles.

1. Prepare the surface by applying different extraction oral flat Slowly extracted to remove all the old mortar round Be careful not to tile plate. Others come off again.
2. From the cleaning surface. Then dry the sodden faithful left damp
3. To cement ratio of 1 to put a slice of the extract.
4. The tiles can be selected to match the pattern or color to stick to the original (but before the paste should be soaked in water for about 1 hours ago.)


repair broken concrete.

Is found always. For home Or the Office of the concrete surface. Style is different. Is tiny. Sangkhalok a similar mesh. This does not look like the ground is broken, but it makes a beautiful track down the crack depth from the surface down to the most. Particular attention should be given that related to the structure of the power or not, because this would break down the collapse. Cracks that are not related to the structure of the building. We can reparable each other.

1. To extract deep into the cracks of the visible lines about 1-2 inches.
2. The dust extracted from finished. Then pour the water soak. Leaving the skin dry.
3. Blended cement ratio of 1 to 2 with 1 part cement 2 parts sand together and let it spin.
4. Plastering the cracks. If the fracture line is to use cement.
5. Last Author smooth surface. Leave to dry.


repair broken plaster walls.

Walls, broken plaster. Usually occurs after the construction always The most likely cause of the beams can not get weight. Allowing fewer beams down Then press the brick wall to crack, probably caused by uneven mixture of cement, lime plaster is not thick enough, home materials deterioration. Or let the water loss after cement plaster solutions do so by

1. The extraction of surface crack width of at least 1 / 2 inches deep, the brick surface.
2. After that, clean the track extraction. Then pour the water soak.
3. Plastering sand, then customize your skin smooth. If the walls leak liner should be used, such as liquid epoxy etc.
4. Leave to dry. Roy then paint to cover repairs.

Reference to Home repairs

ไม่มีความคิดเห็น:

แสดงความคิดเห็น